Providing our customers the highest quality in fabrication

Laser cutting is a technology that uses a laser to slice materials. While typically used for industrial manufacturing applications. Laser cutting works by directing the output of a high-power laser most commonly through optics. The laser optics and CNC (computer numerical control) are used to direct the material, or the laser beam generated.

Source: https://bit.ly/37UqHjM

Shearing, also known as die cutting, is a process which cuts stock without the formation of chips or the use of burning or melting. The most commonly sheared materials are in the form of sheet metal or plates; however, rods can also be sheared.

Source: https://bit.ly/2WQX8JN

Notching is a metal-cutting process used on sheet-metal or thin bar-stock, sometimes on angle sections or tube. A shearing or punching process is used in a press, to cut vertically down and perpendicular to the surface, working from the edge of a workpiece. Sometimes the goal is merely the notch itself, but usually this is a precursor to some other process: such as bending a corner in sheet or joining two tubes at a tee joint, notching one to fit closely to the other.

Source: https://bit.ly/34NVSeP

Burring, A burr is a raised edge or small piece of material that remains attached to a workpiece after a modification process. It is usually an unwanted piece of material and is removed with a deburring tool in a process called 'deburring'. Burrs are most commonly created by machining operations, such as grinding, drilling, milling, engraving, or turning. It may be present in the form of a fine wire on the edge of a freshly sharpened tool or as a raised portion of a surface; this type of burr is commonly formed when a hammer strikes a surface.

Source: https://bit.ly/37UroJU

A press brake is a piece of manufacturing equipment that is used to bend sheet metal. A press brake is typically narrow and long so that large pieces of sheet metal can be bent by it. A press brake bends sheet metal by lowering a punch onto sheet metal that has been positioned on top of a die.

Source: https://bit.ly/3nXGRP5

MIG (metal inert gas) welding uses a feed wire that constantly moves through the gun to create the spark, then melts to form the weld. TIG (tungsten inert gas) welding uses long rods to fuse two metals directly together.

Source: https://bit.ly/3nXGRP5